PG-31 GPS Receiver
PG-31 is based on the SiRF star II e-LP chip
set, it is Laipac's new 12-channel "All-in-view"
receiver module. It offers not only superior
performance (integrated powerful ARM7
CPU core) but also high reliability at
very competitive price in the market. The miniature size (30.6x26x9.8mm) makes PG-31 GPS module suitable for all embedded applications such as handheld, wireless, leisure, navigation, emergency call, and location identification. Additionally, its unique full shield design will efficiently withstand external EMI or RFI interference signals. |
|
Main Features (Phased out)
Snap Start |
< 3 sec (at < 25 minutes off period) |
Hot Start |
8 sec (typ) |
Warm Start |
38 sec (typ) |
Cold Start |
45 sec (typ) |
Satellite Reacquisition |
100 ms |
Channels |
12 satellites |
Position Accuracy |
25m CEP without SA |
Receiver |
L1, C/A code |
|
NMEA-0183 V2.2, 4800, 8, N, 1, GGA, GSA, GSV, |
Protocol |
MC.(VTG , GLL, RMS option) or SiRF Binary |
Maximum Altitude |
< 18,000 M ( 60,000 feet ) |
Maximum Velocity |
< 515 M (700knote) |
Max. Update Rate |
1 Hz |
RF Connector |
MMCX |
Interface |
Interface connector 20 pins |
Dimension |
30.6mm (L) x26mm(w) x 9.8mm (H) |
Weight |
8g |
Firmware Upgrade |
Flash memory for programming software available |
Time Mark |
Output 1 pulse/sec, aligned with GPS time +/ -0.1 usec |
Operating Temperature |
-40°C to +85°C |
Storage Temperature |
-45°C to +100°C |
Operating Humidity |
5% to 95%, No Condensing |
Electrical specifications
• Less than 70mA ( without antenna )
Output terminal and definition
• Interface connector 20-pin (2X10) low
profile socket, 1mm